In order to answer your question properly I need to know how you have sewn the front opening.
From what I can tell it seems that you have used the binding as closure in the front, if so the seam allowance has to be pressed open at the seam line for you to be able to sew the slotted buttonholes.
See if you can take pictures from the right side and wrong side of the opening and either post them here as a reply or email them to me and we will post them here and be able to give you a more accurate response.
I will be looking into making a lesson on how to take your own measurements.
In the mean time you can do the following:
Looking at the lessons where I take measurements, you can take most of the measurements needed yourself using a mirror to make sure the measuring tape is positioned correctly. The only two measurements that may be hard to take are the back armpit distance and the back bodice length.
For the Back Armpit Distance, you take off your top and place about 10 cm of masking tape cross wise about 2 cm away from the starting end of the measuring tape. Then tape the measuring tape to your back at the armpit line. You can find a still image showing where to measure at the 3:09 mins location on theHow to measure for Bodice Pattern-making.
Look in the mirror and read the measurement.
You can also wrap the measuring tape around your body along the armpit line. The measuring tape should go over your arms as well. Place the starting end of the measuring tape over the rest making a ring and tape it in place. Now rotate the measuring tape and place the starting point on the spot where we want to measure from while looking in the mirror. See where the other side of the armpit line is along the measuring tape and read the number.
For the Back Bodice Length, first tie a ribbon around your waist as shown, then measure your front bodice length while looking in the mirror and write it down as show on 4:06 mins of the same chapter. Tape a new piece of masking tape on the measuring tape again as the old one may not stick to your body.
Now as I indicate in the How to measure for Bodice Pattern-making you need to measure from the shoulder line down to the bottom of the ribbon, however to make it easier you can measure from the bottom of the ribbon instead. Tape the measuring tape to your body as shown at the 4:36 mins and measure from the bottom of the ribbon up over your shoulder by your neck and down passing the bust point to the bottom of the ribbon on the front. Write down the measurement.
Now all you have to do is subtract the front measurement from the total measurement that you just took. This will give you the measurement for the back bodice length.
You can also measure by holding the start point of the measuring tape on the back from the bottom of the ribbon with one hand, then pass it over your shoulders and your bust point down to the bottom of the ribbon on the front and get the total measurement for the front and back. Then deduct the front measurement from it as before.
Again make sure to watch the video to measure from the spots I indicated on the body.
I wanted to let you know that the Bound Buttonhole Sewing DVD is now available in our store. You can click on the link here: Bound Button Sewing Video Lessons DVD
You can also click on the DVD Videos link above in the menu.
I wanted to let you know that we are working on the pants block pattern drafting video and will be releasing it in November. Thanks for your suggestion.
I am so happy that you will teach us to make block patterns for pants, sleeves and different styes of collars. I can hardly wait. Also thanks for the timble tip, OMG, why did I not think of it. Normally I do things like this all the time, like think out of the box to get to my goal. I love your simple and creative ways. I am glad you are there saving us stress and money, thank you.
I saw a few videos on youtube about this machine. It seams to be mainly an embroidery machine, maybe targeted at professionals.
It is computerized and has a large screen attached to it and lets you upload and sew your own designs as well. If your are planning to use it for your business it may be worth it to spend this much money.
The best way to calculate how much fabric you need is to use your pattern to figure it out. The average fabric is from 45 to 54 inches wide. Imagine that the fabric we want to by is 45 inches wide. If you need to fold the fabric to cut the pieces, divide 45 inches by 2 which gives us 22.5 inches. Place a measuring tape parallel with the longer edge of your dining table with a distance of 22.5 inches. Imagine that the measuring tape is the folded edge of your fabric and the table edge is the aligned selvedges. Now Place all the pattern pieces within this area as best as possible. This is basically like placing your pattern on your folded fabric which is 45 inches wide.
The lengthwise grain line on your pattern pieces should be parallel with the edge of the table or the measuring tape. The fold line marks on your pattern should be placed by the measuring tape. Now that the pattern pieces are in place, measure the length to see how much fabric you will need.
Since the fabric may not be cut straight at both ends, we need to always buy extra to be able to square the fabric at both ends before cutting.
Also if you plan to wash your garment at home, you need to buy extra fabric to pre shrink your fabric before cutting it.
Repeat the steps for a 54 inch wide fabric as well and write down how much you need to buy both the 45 and 54 inch wide fabric before going to the store.
If you can't find a timble that fits you right, get the one that is a bit larger and press the rim a bit to make it fit. I used to step on it with my slippers to squeeze it abit, I couldn't find one that fit me well when I was young, they were either too big or too tight.
Thanks for the support. I try to make the video lessons with our members in mind. We are always thinking about the best way to communicate using the video format. I am glad that you like the lessons.
Another way of transferring a pattern to a fabric besides using carbon paper, would be to use a light box. A light box is a box with glass on one side and a bulb inside which when turned on allows you to see the pattern design beneath the fabric and let you copy it.
You can also tape your pattern to a clean window pane and then tape your fabric on top to copy it. This works best when it is bright outside.
When drawing on your fabric you can use a regular pencil which is not very dark, like an H pencil.
These techniques work best on lighter colored fabric. For darker fabric you can use light colored carbon paper.
Nehzat's voice is soothing and calming at the same time the male voice is also relaxed. They both put me at ease. I don't mind one way or the other because the quality of video and performance is the same, great. The voices have the same outcome in my work. Thank you Nehzat I am loving learning without stress. You are so thorough in info and available for response. I love it. Thank you.
Dear charweebee,
In order to answer your question properly I need to know how you have sewn the front opening.
From what I can tell it seems that you have used the binding as closure in the front, if so the seam allowance has to be pressed open at the seam line for you to be able to sew the slotted buttonholes.
See if you can take pictures from the right side and wrong side of the opening and either post them here as a reply or email them to me and we will post them here and be able to give you a more accurate response.
Happy sewing,
Nehzat
Dear suzkim,
I will be looking into making a lesson on how to take your own measurements.
In the mean time you can do the following:
Looking at the lessons where I take measurements, you can take most of the measurements needed yourself using a mirror to make sure the measuring tape is positioned correctly. The only two measurements that may be hard to take are the back armpit distance and the back bodice length.
For the Back Armpit Distance, you take off your top and place about 10 cm of masking tape cross wise about 2 cm away from the starting end of the measuring tape. Then tape the measuring tape to your back at the armpit line. You can find a still image showing where to measure at the 3:09 mins location on the How to measure for Bodice Pattern-making.
Look in the mirror and read the measurement.
You can also wrap the measuring tape around your body along the armpit line. The measuring tape should go over your arms as well. Place the starting end of the measuring tape over the rest making a ring and tape it in place. Now rotate the measuring tape and place the starting point on the spot where we want to measure from while looking in the mirror. See where the other side of the armpit line is along the measuring tape and read the number.
For the Back Bodice Length, first tie a ribbon around your waist as shown, then measure your front bodice length while looking in the mirror and write it down as show on 4:06 mins of the same chapter. Tape a new piece of masking tape on the measuring tape again as the old one may not stick to your body.
Now as I indicate in the How to measure for Bodice Pattern-making you need to measure from the shoulder line down to the bottom of the ribbon, however to make it easier you can measure from the bottom of the ribbon instead. Tape the measuring tape to your body as shown at the 4:36 mins and measure from the bottom of the ribbon up over your shoulder by your neck and down passing the bust point to the bottom of the ribbon on the front. Write down the measurement.
Now all you have to do is subtract the front measurement from the total measurement that you just took. This will give you the measurement for the back bodice length.
You can also measure by holding the start point of the measuring tape on the back from the bottom of the ribbon with one hand, then pass it over your shoulders and your bust point down to the bottom of the ribbon on the front and get the total measurement for the front and back. Then deduct the front measurement from it as before.
Again make sure to watch the video to measure from the spots I indicated on the body.
Hope this helps,
Nehzat
Hi nehzat_fan,
Thanks for your kind words. Welcome to the site.
Happy Sewing,
Nehzat
I like Arad's voice. Nehzat, you have charming tones to your voice; but they are low, and don't stand out well on the videos.
Arad has a clear delivery.
Who does the photography work? That and the lighting are excellent.
Love,
nehzat_fan
What fabric is the skirt? I can see it was woven in Italy. Is it a wool? Crepe or gabardine?
Is the lining made of China silk?
What online fabric store would you recommend?
Love,
nehzat_fan
Dear silkpins80,
I wanted to let you know that the Bound Buttonhole Sewing DVD is now available in our store. You can click on the link here: Bound Button Sewing Video Lessons DVD
You can also click on the DVD Videos link above in the menu.
Happy Sewing,
Nehzat
Dear VeronicaD,
Thanks for your kind words, I really appreciate it and welcome to our online community.
Happy sewing,
Nehzat
The video is full of wonderful information. Could you please tell me when it will be available for purchase on DVD? Thank You
Hi Tracy,
Welcome to eSewingWorkshop, I hope that you find our lessons useful.
Nehzat
Dear Denise and all,
I wanted to let you know that we are working on the pants block pattern drafting video and will be releasing it in November. Thanks for your suggestion.
Happy sewing,
Nehzat
Dear sewmama,
Thanks for your kind words and your suggestion for a lesson on bound buttonhole sewing.
Happy sewing,
Nehzat
Hi didi,
You are welcome, and thanks so much for your kind words.
Nehzat
Hi! Nehzat,
I am so happy that you will teach us to make block patterns for pants, sleeves and different styes of collars. I can hardly wait. Also thanks for the timble tip, OMG, why did I not think of it. Normally I do things like this all the time, like think out of the box to get to my goal. I love your simple and creative ways. I am glad you are there saving us stress and money, thank you.
Hi, I am Tracy . I am a new member of forum. Would a newcomer be warmly welcome here? Good day you guys!!!
Hi tinkles,
I saw a few videos on youtube about this machine. It seams to be mainly an embroidery machine, maybe targeted at professionals.
It is computerized and has a large screen attached to it and lets you upload and sew your own designs as well. If your are planning to use it for your business it may be worth it to spend this much money.
Regards,
Nehzat
Hi didi,
The best way to calculate how much fabric you need is to use your pattern to figure it out. The average fabric is from 45 to 54 inches wide. Imagine that the fabric we want to by is 45 inches wide. If you need to fold the fabric to cut the pieces, divide 45 inches by 2 which gives us 22.5 inches. Place a measuring tape parallel with the longer edge of your dining table with a distance of 22.5 inches. Imagine that the measuring tape is the folded edge of your fabric and the table edge is the aligned selvedges. Now Place all the pattern pieces within this area as best as possible. This is basically like placing your pattern on your folded fabric which is 45 inches wide.
The lengthwise grain line on your pattern pieces should be parallel with the edge of the table or the measuring tape. The fold line marks on your pattern should be placed by the measuring tape. Now that the pattern pieces are in place, measure the length to see how much fabric you will need.
Since the fabric may not be cut straight at both ends, we need to always buy extra to be able to square the fabric at both ends before cutting.
Also if you plan to wash your garment at home, you need to buy extra fabric to pre shrink your fabric before cutting it.
Repeat the steps for a 54 inch wide fabric as well and write down how much you need to buy both the 45 and 54 inch wide fabric before going to the store.
Happy sewing,
Nehzat
Hi did,
If you can't find a timble that fits you right, get the one that is a bit larger and press the rim a bit to make it fit. I used to step on it with my slippers to squeeze it abit, I couldn't find one that fit me well when I was young, they were either too big or too tight.
Hope this helps,
Nehzat
It is a good idea but I don't have the box ( I would love it) and windows is a wonderful subsitude but.....I'll see if there are other options.
Thanks.
Hi Veronica,
Thanks for the kind words.
Generally you need to have about 2.5 cm or 1 inch of ease at the sleeves for knitted fabric.
Happy sewing,
Nehzat
Hi Didi,
Thanks for the support. I try to make the video lessons with our members in mind. We are always thinking about the best way to communicate using the video format. I am glad that you like the lessons.
Thanks again for your feedback.
Nehzat
Hi Darla,
Thank you so much, I appreciate your kind words.
Nehzat
Hi did,
Another way of transferring a pattern to a fabric besides using carbon paper, would be to use a light box. A light box is a box with glass on one side and a bulb inside which when turned on allows you to see the pattern design beneath the fabric and let you copy it.
You can also tape your pattern to a clean window pane and then tape your fabric on top to copy it. This works best when it is bright outside.
When drawing on your fabric you can use a regular pencil which is not very dark, like an H pencil.
These techniques work best on lighter colored fabric. For darker fabric you can use light colored carbon paper.
Hope this helps,
Nehzat
Hi nattha,
You are welcome, all the best.
Nehzat
Nehzat's voice is soothing and calming at the same time the male voice is also relaxed. They both put me at ease. I don't mind one way or the other because the quality of video and performance is the same, great. The voices have the same outcome in my work. Thank you Nehzat I am loving learning without stress. You are so thorough in info and available for response. I love it. Thank you.
I preferred Nehzat's voice...while I have no problem with the new narration, there was something comforting about listening to Nehzat....